 |
|
This group of stack and gas monitors are used for measuring Mercury, Oxygen, Water Vapour, Gases (SO3, NH3, NO, NO2, SO2, H2S, HCl. CO, CO2) and Hydrocarbons.
 EXM400
The EXM400 On-Line Process Gas Analyser is designed to work under harsh conditions for stack measurements of any combination of the following parameters: NH3, NO, NO2, SO2, H2S, Benzene, Toulene, Xylene. The EXM400 is has superior features to other instruments due to:
- No interference from O2, N2, CO, CO2, H2O
- No converter necessary eliminating converter inefficiencies
- Ultra fast response allows detailed analysis of stack emissions gases.
Brochure
 LANCOM 200/Model 440 Sulfur Trioxide analyser
The LANCOM 200 is an SO3 monitor that is used for monitoring fly ash, boiler efficiency, air heater fouling in coal power plants and acid smut/aerosol emissions. The LANCOM 200 is the world leader in SO3 monitoring for power plants including the following features:
- LANCOM 200 portable analyser is designed for periodic monitoring
- Model 440 continuous analyser can continuously monitor SO3 or sulfuric acid in stacks and flue gas applications.
- Allows monitoring for compliance with EN 14181 in Combustion plants and waste incinerators.
Brochure
 EC1632 Oxygen Analyser
- Monitors oxygen concentrations in the range of 0 -100% with an accuracy of + 1%.
- An optional two sensor version delivers improved sensitivity and accuracy.
- Can display ‘%-combustibles’ for instances when the combustion process is fuel rich or has reducing conditions.
Brochure
 EC1635 Water Vapour Transmitter
- Accurate moisture control of drying oven atmospheres up to 600ºC.
- Can be used with various controllers (e.g. PLCs) to provide accurate, continuous control of moisture levels in drying processes.
- The robust zirconia sensor will provide accurate and virtually trouble-free measurement of oxygen for many years.
Brochure
Mercury Instruments  SM-3 Stack Mercury Monitor
The Mercury Instruments SM-3 Mercury Stack Gas Monitor is used for continuous monitoring of mercury in stack gas.
- Approved by TÜV (published in GMBl Nr. 33/1999)
- Detects elemental, ionic and bound mercury
- Range 1 ... 45; 0 ... 75; 0 ... 500 µg/m³ Hg (others optional)
- True continuous measurement (no measuring cycle)
- No wet-chemistry - no use of reagents
Brochure
 Mercury Instruments VM-3000 Mercury Vapor Monitor
The Mercury Instruments VM-3000 Mercury Vapor Monitor serves for continuous measurement of the mercury concentration in gases in laboratories as well as industry and mobile applications.
- Measuring ranges 0.1-100 / 0-1000 / 0-2000 µg/m3
- Proven reliable detection method: UV absorption
- Continuous operation
- Auto zero
- Integrated data logger (option), records up to 100 days of measuring
- Integrated battery for mobile use (optional)
Brochure
 Mercury Instruments UT 3000 Mercury Ultratracer
The Mercury Instruments UT-3000 Mercury UltraTracer provides a compact and reliable tool for measuring mercury in gases at ultra trace levels.
This instrument can be used for :
- Air quality studies
- Monitoring of indoor air pollution
- Environmental pollution source tracking
- Plume profiling
- Pollution prevention
Brochure
 Synspec Alpha 116
The Synspec Alpha M/TNMHC analyser 116 is built for analysing methane and the sum of all other hydrocarbons in air (TNMHC). Synspec have designed three analyzers for these measurements, the Alpha 114 for background monitoring, the Alpha 115 for standard ambient monitoring and the Alpha 116 for emission monitoring.
- Range: 0.1 to 10ppm up to 0.1-1000ppm for Methane, 0.05ppm to 100ppm for TNMHC
- CE approval for EMC conformity: EN 61010-1, EN 61000-6-2 and EN 60111-6-3.
- Detector: FID. levels: 0.1ppm for methane, 50ppb for TNMHC, FID detector, cycle time 6-15 min.
- Reproduceibility: 1% FS
Brochure
 
Teledyne Analytical Instruments 320P Portable oxygen analyser
The Teledyne Analytical Instruments 320 series of portable oxygen analysers improves process efficiency, lowers fuel costs, and reduces explosive hazards by monitoring oxygen levels at vital points of the combustion process in applications such as:
- Power plants
- Refineries
- Chemical / petrochemical plants
- Steel making .
Brochure
 Teledyne Analytical Instruments CEA-9001 Hand held Flue gas analyser
The Teledyne Analytical Instruments CEA-9001 is a digital, hand-held, flue gas analyser featuring:
- State-of-the-art microprocessor technology.
- Ideally suited for inspecting and servicing small and medium sized heater installations
- Used for safety-relevant technical inspections of CO emission concentrations in gas combustion plants.
Brochure
Teledyne Analytical Instruments PEM-9002 Portable Emissions Monitor
 The Teledyne Analytical Instruments PEM-9002 Portable Emissions Monitor is a full-featured monitor offering Fast, cost-effective analysis of stack gas emissions. As many as 4 parameters (O2, CO, NO, SO2, temp) can be displayed at once allowing the operator to optimise combustion efficiency whilst minimising pollution.
The PEM-9002 calculates
- CO2,
- Combustion efficiency (Eta),
- waste gas losses (qA),
- NOX,
- dewpoint,
- Lambda,
- pressure and temperature difference.
Brochure
Teledyne Analytical Instruments MAX 5 Combustion Efficiency Analyser
 The Teledyne Analytical Instruments Max 5 Combustion Efficiency Analyser is the quick and easy way to fine tune boilers, furnaces, fire boxes, and any other commercial or industrial combustion process.
The Max 5 analyses
- O2,
- CO, CO2,
- total combustiles,
- temp,
- net combustion efficiency.
Brochure
 Teledyne Analytical Instruments LGA-3500 In-Situ Gas Analysis system
The Teledyne Analytical Instruments LGA-3500 (Using Tunable Diode Laser Absorption Spectroscopy) comprises of a laser transmitter, receiver and a central processing unit. The transmitter launches a laser beam with a selected wavelength across the diameter of the pipe to the receiver unit (directly opposite). The resulting electrical signal is then sent to the central processing unit (CPU) placed in a nearby shelter or control room (up to 300 meters away). The LGA-3500 measures O2, CO, CO2, CH4, NH3, HCl and H2O in stack systems and is ideal for:
- The Steel industry
- Petrochemical
- Power plants
- Waste incineration
- Cement and glass industries
Brochure
Durag D-FW 230/231 Filter Monitor
 The Durag D-FW 230/231 filter monitor is used for continuous monitoring of filter installations in flue gas ducts and duct work for dust extraction etc.
- Continuous in-situ measurement
- Low purchase, installation and maintenance costs
- Fast on-line performance check capability
- Continuous in-situ measurement
- Filter monitoring based on the triboelectric measuring principle
Brochure
| |
